Browse by Journal / Conference

Bapari, S and Ghosh, P and Lienert, U and Chokshi, AH (2020) A multi-scale deformation analysis for a particulate composite at the rigidity threshold. In: Composites Science and Technology, 191 .

Thomas, P and Varughese, KT and Dwarakanath, K and Varma, KBR (2010) Dielectric properties of Poly(vinylidene fluoride)/CaCu3Ti4O12 composites. In: Composites Science and Technology, 70 (3). pp. 539-545.

Mondal, AK and Kumar, S (2009) Impression creep behaviour of magnesium alloy-based hybrid composites in the transverse direction. In: Composites Science and Technology, 69 (10, Sp). pp. 1592-1598.

Sailaja, RRN (2006) Mechanical and thermal properties of bleached kraft pulp–LDPE composites: Effect of epoxy functionalized compatibilizer. In: Composites Science and Technology, 66 (13). pp. 2039-2048.

Pawar, Prashant M and Ganguli, Ranjan (2006) Modeling progressive damage accumulation in thin walled composite beams for rotor blade applications. In: Composites Science and Technology, 66 (13). pp. 2337-2349.

Ramamurty, U (2005) Assessment of load transfer characteristics of a fiber-reinforced titanium-matrix composite. In: Composites Science and Technology, 65 (11-12). pp. 1815-1825.

Pawar, Prashant M and Ganguli, Ranjan (2005) On the effect of matrix cracks in composite helicopter rotor blade. In: Composites Science and Technology, 65 (3-4). pp. 581-594.

Garg, AK and Mahapatra, Roy D and Suresh, S and Gopalakrishnan, S and Omkar, SN (2004) Estimation of composite damage model parameters using spectral finite element and neural network. In: Composites Science and Technology, 64 (16). pp. 2477-2493.

Rao, VV and Murthy, Krishna MV and Nagaraju, J (2004) Thermal conductivity and thermal contact conductance studies on $Al_{2}O_{3}/Al-AlN$ metal matrix composite. In: Composites Science and Technology, 64 (16). pp. 2459-2462.

Kumar, Subodh and Mondal, Ashok Kumar and Dieringa, Hajo and Kainer, Karl-Ulrich (2004) Analysing hysteresis and residual strains in thermal cycling curves of short fibre reinforced Mg-MMCs. In: Composites Science and Technology, 64 (9). pp. 1179-1189.

Nag, A and Mahapatra, Roy D and Gopalakrishnan, S and Sankar, TS (2003) A spectral finite element with embedded delamination for modeling of wave scattering in composite beams. In: Composites Science and Technology, 63 (15). pp. 2187-2200.

Kumar, Subodh and Ingole, Sudeep and Dieringa, Hajo and Kainer, Karl U (2003) Analysis of thermal cycling curves of short fibre reinforced Mg-MMCs. In: Composites Science and Technology, 63 (12). pp. 1805-1814.

Vidyashankar, BR and Murty, Krishna AV (2001) Analysis of laminates with ply drops. In: Composites Science and Technology, 61 (5). pp. 749-758.

Iwai, Y and Honda, T and Miyajima, T and Iwasaki, Y and Surappa, MK and Xu, JF (2000) Dry sliding wear behavior of Al2O3 fiber reinforced aluminum composites. In: Composites Science and Technology, 60 (9). pp. 1781-1789.

Iwai, Y and Honda, T and Miyajima, T and Iwasaki, Y and Surappa, MK and Xu, JF (2000) Dry sliding wear behavior of $Al_{2}O_{3}$ fiber reinforced aluminum composites. In: Composites Science and Technology, 60 (09). pp. 1781-1789.

Nagarajan, Sucheta and Dutta, B and Surappa, MK (1999) The effect of SiC particles on the size and morphology of eutectic silicon in cast A356/SiCp composites. In: Composites Science and Technology, 59 (6). 897-902 .

Ramaswamy, Parvati and Seetharamu, S and Varma, KBR and Rao, KJ (1997) Al2O3---ZrO2 composite coatings for thermal-barrier applications. In: Composites Science and Technology, 57 (1). pp. 81-89.

Surappa, MK and Sivakumar, P (1993) Fracture Toughness Evaluation of $2040-Al/Al_2O_3$ Particulate Composites by Instrumented Impact. In: Composites Science and Technology, 46 (3). pp. 287-292.

Harikumar, HK and Murty, Krishna AV (1991) On Modelling of Laminates Containing Free-Edge Delaminations. In: Composites Science and Technology, 42 (4). pp. 393-411.

kumar, Vijaya K and Murty, Krishna AV (1988) Iterative modelling for stress analysis of composite laminates. In: Composites Science and Technology, 32 (3). pp. 165-181.