Browse by IISc Authors

Conference Proceedings

Raj, Ashok J and Kailas, Satish V (2016) Effect of strain rate response and pin diameter on mechanically mixed layer formation and wear mechanisms in a Ti6Al4V-SS316L pair. In: Malaysian International Tribology Conference (MITC), NOV 16-17, 2015, Penang, MALAYSIA, pp. 137-138.

Conference Paper

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Factors influencing stick-slip motion: effect of hardness, crystal structure and surface texture. In: ASME/STLE International Joint Tribology Conference, OCT 24-26, 2011, Los Angeles, CA, USA, pp. 71-73.

Journal Article

Singh, Neera and Edachery, Vimal and Rajput, Monika and Chatterjee, Kaushik and Kailas, Satish V and Prashanth, KG (2022) Ti6Al7Nb–TiB nanocomposites for ortho-implant applications. In: Journal of Materials Research . ISSN 0884-2914

Kumar, Ajay P and Madhu, H C and Pariyar, Abhishek and Perugu, Chandra S and Kailas, Satish V and Garg, Uma and Rohatgi, Pradeep (2020) Friction stir processing of squeeze cast A356 with surface compacted graphene nanoplatelets (GNPs) for the synthesis of metal matrix composites. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 769 .

Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Multi-Length Scale Characterization of Microstructure Evolution and Its Consequence on Mechanical Properties in Dissimilar Friction Stir Welding of Titanium to Aluminum. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A (11). pp. 5153-5173.

Kar, Amlan and Kailas, Satish V and Suwas, Satyam (2019) Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 72 (6, SI). pp. 1533-1536.

Anbukkarasi, R and Kailas, Satish V (2019) Role of Third Material (Interlayer) on Mechanical Properties of the AA2024-Copper Joints Carried out by Friction Stir Welding (FSW). In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 72 (6, SI). pp. 1603-1606.

Murugan, Balamagendiravarman and Thirunavukarasu, Gopinath and Kundu, Sukumar and Kailas, Satish V (2019) Influence of Tool Traverse Speed on Structure, Mechanical Properties, Fracture Behavior, and Weld Corrosion of Friction Stir Welded Joints of Aluminum and Stainless Steel. In: ADVANCED ENGINEERING MATERIALS, 21 (2).

Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Microstructural Modification and High-Temperature Grain Stability of Aluminum in an Aluminum-Titanium Friction Stir Weld with Zinc Interlayer. In: JOM, 71 (1). pp. 444-451.

Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Significance of tool offset and copper interlayer during friction stir welding of aluminum to titanium. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 100 (1-4). pp. 435-443.

Noor El-Din, MR and Mishrif, Marwa R and Kailas, Satish V and Suvin, PS and Mannekote, Jagadeesh K (2018) Studying the lubricity of new eco-friendly cutting oil formulation in metal working fluid. In: INDUSTRIAL LUBRICATION AND TRIBOLOGY, 70 (9). pp. 1569-1579.

Kar, Amlan and Kailas, Satish V and Suwas, Satyam (2018) Effect of Zinc Interlayer in Microstructure Evolution and Mechanical Properties in Dissimilar Friction Stir Welding of Aluminum to Titanium. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (11). pp. 6016-6026.

Kar, Amlan and Choudhury, Sounak K and Suwas, Satyam and Kailas, Satish V (2018) Effect of niobium interlayer in dissimilar friction stir welding of aluminum to titanium. In: MATERIALS CHARACTERIZATION, 145 . pp. 402-412.

Dixit, Saurabh and Kashyap, Sanjay and Kailas, Satish V and Chattopadhyay, K (2018) Manufacturing of high strength aluminium composites reinforced with nano tungsten particles for electrical application and investigation on in-situ reaction during processing. In: JOURNAL OF ALLOYS AND COMPOUNDS, 767 . pp. 1072-1082.

Madhu, H C and Kailas, Satish V (2018) Fabrication of localised aluminium foam by a novel polymeric blowing agent. In: MATERIALS CHARACTERIZATION, 142 . pp. 340-351.

Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2018) Development of microstructure and texture during single and multiple pass friction stir processing of a strain hardenable aluminium alloy. In: MATERIALS CHARACTERIZATION, 140 . pp. 134-146.

Murugan, Balamagendiravarman and Thirunavukarasu, Gopinath and Kundu, Sukumar and Kailas, Satish V and Chatterjee, Subrata (2018) Interfacial Microstructure and Mechanical Properties of Friction Stir Welded Joints of Commercially Pure Aluminum and 304 Stainless Steel. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (6, SI). pp. 2921-2931.

Madhu, H C and Kumar, P Ajay and Perugu, Chandra S and Kailas, Satish V (2018) Microstructure and Mechanical Properties of Friction Stir Process Derived Al-TiO2 Nanocomposite. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (3). pp. 1318-1326.

Dixit, Saurabh and Mahata, Avik and Mahapatra, D Roy and Kailas, Satish V and Chattopadhyaya, K (2018) Multi-layer graphene reinforced aluminum - Manufacturing of high strength composite by friction stir alloying. In: COMPOSITES PART B-ENGINEERING, 136 . pp. 63-71.

Mannekote, Jagadeesh K and Kailas, Satish V and Venkatesh, K and Kathyayini, N (2018) Environmentally friendly functional fluids from renewable and sustainable sources-A review. In: RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 81 (2). pp. 1787-1801.

Raj, Ashok J and Pottirayil, Anirudhan and Kailas, Satish V (2017) Dry Sliding Wear Behavior of Ti-6Al-4V Pin Against SS316L Disk at Constant Contact Pressure. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 139 (1).

Agrawal, Arvind K and Narayanan, R Ganesh and Kailas, Satish V (2017) End forming behaviour of friction stir processed Al 6063-T6 tubes at different tool rotational speeds. In: JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 52 (7). pp. 434-449.

Kumar, Ajay P and Yadav, Devinder and Perugu, Chandra S and Kailas, Satish V (2017) Influence of particulate reinforcement on microstructure evolution and tensile properties of in-situ polymer derived MMC by friction stir processing. In: MATERIALS & DESIGN, 113 . pp. 99-108.

Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2017) Microstructure and Texture Evolution during Single- and Multiple-Pass Friction Stir Processing of Heat-Treatable Aluminum Alloy 2024. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (9). pp. 4247-4261.

Prabu, S S Mani and Madhu, H C and Perugu, Chandra S and Akash, K and Kumar, P Ajay and Kailas, Satish V and Anbarasu, Manivannan and Palani, I A (2017) Microstructure, mechanical properties and shape memory behaviour of friction stir welded nitinol. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 693 . pp. 233-236.

Bahl, Sumit and Nithilaksh, P L and Suwas, Satyam and Kailas, Satish V and Chatterjee, Kaushik (2017) Processing-Microstructure-Crystallographic Texture-Surface Property Relationships in Friction Stir Processing of Titanium. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 26 (9). pp. 4206-4216.

Chaudhry, V and Kailas, Satish V (2015) Damage mechanisms in stainless steel and chromium carbide coatings under controlled environment fretting conditions. In: WEAR, 334 . pp. 75-81.

Menezes, Pradeep L and Kishore, Kishore and Kailas, Satish V and Lovell, Michael R (2015) Influence of Surface Texture and Roughness of Softer and Harder Counter Materials on Friction During Sliding. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (1). pp. 393-403.

Castellan, Enzo and Kailas, Satish V and Madayi, Shimjith and Raj, Rishi (2015) Low-Wear High-Friction Behavior of Copper Matrix Composites Dispersed With an In Situ Polymer Derived Ceramic. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 137 (2).

Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2015) Restoration Mechanisms During the Friction Stir Processing of Aluminum Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (7). pp. 2823-2828.

Nadammal, Naresh and Kailas, Satish V and Suwas, Satyam (2015) A bottom-up approach for optimization of friction stir processing parameters; a study on aluminium 2024-T3 alloy. In: MATERIALS & DESIGN, 65 . pp. 127-138.

Kumar, Ajay P and Raj, Rishi and Kailas, Satish V (2015) A novel in-situ polymer derived nano ceramic MMC by friction stir processing. In: MATERIALS & DESIGN, 85 . pp. 626-634.

Chaudhry, V and Kailas, Satish V (2014) Elastic-plastic contact conditions for frictionally constrained bodies under cyclic tangential loading. In: Journal of Tribology - Transactions of the ASME, 136 (1). 011401_1-011401_17.

Chaudhry, V and Simha, KRY and Kailas, Satish V (2014) Energy based approach for the evaluation of damage under partial slip and gross sliding condition. In: WEAR, 315 (1-2). pp. 115-124.

Bobji, MS and Kailas, Satish V and Ananthasuresh, GK and Ayappa, Ganapathy and Jayaram, Vikram and Visweswariah, Sandhya S (2013) Sanjay Kumar Biswas (1945-2013). In: Current Science, 104 (12). pp. 1718-1719.

Chaudhry, V and Kailas, Satish V (2013) Damage quantification under sliding and seizure condition using first-of-a-kind fretting machine. In: WEAR, 305 (1-2). pp. 140-154.

Ramulu, Perumalla Janaki and Narayanan, Ganesh R and Kailas, Satish V (2013) Forming limit investigation of friction stir welded sheets: influence of shoulder diameter and plunge depth. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 69 (9-12). pp. 2757-2772.

Chaudhry, V and Kailas, Satish V (2013) Fretting studies on self-mated stainless steel and chromium carbide coated surfaces under controlled environment conditions. In: WEAR, 301 (1-2, S). pp. 524-539.

Kumar, Mukesh and Kailas, Satish V and Narayanan, Ganesh R (2013) Influence of external weld flash on the in-plane plane-strain formability of friction stir welded sheets. In: JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 48 (6). pp. 376-385.

Ramulu, Perumalla Janaki and Kailas, Satish V and Narayanan, Ganesh R (2013) Influence of tool rotation speed and feed rate on the forming limit of friction stir welded AA6061-T6 sheets. In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 227 (C3). pp. 520-541.

Ramulu, Janaki P and Narayanan, Ganesh R and Kailas, Satish V and Reddy, Jayachandra (2013) Internal defect and process parameter analysis during friction stir welding of Al 6061 sheets. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 65 (9-12). pp. 1515-1528.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) The Role of Strain Rate Response on Tribological Behavior of Metals. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 135 (1).

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) Tribological response of soft materials sliding against hard surface textures at various numbers of cycles. In: LUBRICATION SCIENCE, 25 (2, SI). pp. 79-99.

Devaraju, A and Perumal, Elaya A and Alphonsa, J and Kailas, Satish V and Venugopal, S (2012) Sliding wear behavior of plasma nitrided Austenitic Stainless Steel Type AISI 316LN in the temperature range from 25 to 400 degrees C at 10(-4) bar. In: WEAR, 288 . pp. 17-26.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Analysis of Strain Rates and Microstructural Evaluation during Metal Forming: Role of Surface Texture and Friction. In: TRIBOLOGY TRANSACTIONS, 55 (5). pp. 582-589.

Devaraju, A and Elayaperumal, A and Alphonsa, J and Kailas, Satish V and Venugopal, S (2012) Microstructure and dry sliding wear resistance evaluation of plasma nitrided austenitic stainless steel type AISI 316LN against different sliders. In: SURFACE & COATINGS TECHNOLOGY, 207 . pp. 406-412.

Uyyuru, RK and Kailas, Satish V (2006) Numerical analysis of friction stir welding process. In: Journal of Materials Engineering and Performance, 15 (5). pp. 505-518.