|
 | Up a level |
Gutta, B and Huilgol, P and Perugu, CS and Kumar, G and Reddy, ST and Toth, LS and Bouaziz, O and Kailas, SV (2024) A Polymer-Based Metallurgical Route to Produce Aluminum Metal-Matrix Composite with High Strength and Ductility. In: Materials, 17 (1).
Srinivas, MS and Kumar, D and Suvin, PS and Kailas, SV and Pawar, SR and Roy Choudhury, M (2024) Green lubricants in action: a comprehensive performance evaluation of groundnut oil-based cutting fluids in metal machining processes. In: Physica Scripta, 99 (6).
Abolusoro, OP and Khoathane, MC and Mhike, W and Omoniyi, P and Kailas, SV and Akinlabi, ET (2024) Influence of welding parameters and post weld heat treatment on mechanical, microstructures and corrosion behaviour of friction stir welded aluminium alloys. In: Journal of Materials Research and Technology, 32 . pp. 634-648.
Singh, VK and Likhar, PV and Simha, KRY and Kandan, AM and Prasad, KS and Krishna, PH and Kailas, SV (2024) Lateral force controlled impact tribometer characterizing transient friction: Effect of contact pressure. In: Tribology International, 196 .
Vu, VQ and Pariyar, A and Toth, LS and Kailas, SV (2024) Obtaining High-Strength Aluminum Sheets from Powder by Friction-Assisted Lateral Extrusion. In: 6th International Conference on Engineering Research and Application, ICERA 2023, 1 December 2023 through 2 December 2023, Thai Nguyen, pp. 261-270.
Kavanur Ramesh, SK and Subramanya, J and Kumar, G and Kailas, SV and Mudalagi, S (2024) Optimization of Process Parameters in Friction Stir Processing for the Development of Polymer-Derived Aluminum Matrix Composites. In: 21st ISME International conference on Advances in Mechanical Engineering, ISME 2023, 13 July 2023through 15 July 2023, Bengaluru, pp. 71-79.
Parameswaran, G and Jayaram, V and Kailas, SV (2024) Predicting Low Sliding Friction in Al-Steel Reciprocating Sliding Experiment after a Controlled Grinding of the Steel Counterface. In: Lubricants, 12 (8).
Philip, JT and Singh, K and Kailas, SV (2024) Ti6Al4V interacting with Al2O3 under ambient and vacuum conditions: Effect of plastic deformation and tribo-chemical reactions on wear mechanisms. In: Wear, 550-55 .
Pariyar, A and John, A and Perugu, CS and Edachery, V and Kailas, SV (2023) Influence of laser beam welding parameters on the microstructure and mechanical behavior of Inconel X750 superalloy. In: Manufacturing Letters, 35 . pp. 33-38.
Pariyar, A and Perugu, CS and Abhishek, BM and Toth, LS and Kailas, SV (2023) In-situ polymer-derived SiOC strengthened aluminum sheets: Investigations on its manufacturing and structure-property correlations. In: Materialia, 30 .
Pariyar, A and Vu, VQ and Kailas, SV and Toth, LS (2023) Room-Temperature Single-Step Production of Ultrafine-Grained Bulk Metallic Sheets From Al Powder. In: Journal of Manufacturing Science and Engineering, 145 (10).
Divakaran, A and Likhar, PV and Kailas, SV (2023) Evaluation of Boundary Lubrication Properties of Fatty Acids Using a Lateral Force-Controlled Tribometer. In: Tribology Letters, 71 (3).
Kumar, S and Divakaran, A and Kailas, SV (2023) Fabrication and tribo characteristics of in-situ polymer-derived nano-ceramic composites of Al-Mg-Si alloy. In: Tribology International, 180 .
Likhar, PV and Divakaran, A and Kailas, SV (2022) An energy dissipation tribometer to evaluate friction in boundary lubrication regime. In: Tribology International, 171 .
Sharma, V and Gupta, RK and Kailas, SV and Basu, B (2022) Probing lubricated sliding wear properties of HDPE/UHMWPE hybrid bionanocomposite. In: Journal of Biomaterials Applications .
Edachery, V and Ravi, S and Badiuddin, AF and Tomy, A and Kailas, SV and Suvin, PS (2022) Wetting behaviour of a Green cutting fluid (GCF); influence of surface roughness and surface energy of AA5052, Ti6Al4V and EN31. In: Materials Today: Proceedings .
John, A and Edachery, V and Agilan, M and Rajendran, A and Mathiyalagan, S and Madhu, HC and Kailas, SV (2022) Influence of Sliding-Friction Induced Strain Hardening on the Tribological Behavior of Friction Stir Processed AA2219 Alloy. In: Tribology Online, 17 (1). pp. 9-18.
Edachery, V and Swamybabu, V and Gurupatham, A and Paramasamy, M and Kailas, SV (2022) The role of surface topography and normal load in the initiation of ratchetting-peak friction, seizure, scuffing, and elastic shakedown. In: Journal of Tribology, 144 (2).
Edachery, V and Swamybabu, V and Adarsh, D and Kailas, SV (2022) Influence of surface roughness frequencies and roughness parameters on lubricant wettability transitions in micro-nano scale hierarchical surfaces. In: Tribology International, 165 .
Karupannasamy, DK and Kailas, SV and Shankar, S and Sasikumar, KSK (2022) A Predictive Model for Galling Phenomenon and Its Applicability for Deep Drawing Processes. In: Journal of Tribology, 144 (1).
Rajendran, A and Hariharan, R and Kailas, SV (2022) Influence of complete tool-offset position on intrinsic microstructure and its effect on fatigue life of aa2024 alloy-copper joint made by friction stir welding. In: Materials Performance and Characterization, 11 (2).
Samudre, P and Kailas, SV (2022) Thermal performance enhancement in open-pore metal foam and foam-fin heat sinks for electronics cooling. In: Applied Thermal Engineering, 205 .
Pariyar, A and Perugu, CS and Toth, LS and Kailas, SV (2021) Microstructure and mechanical behavior of polymer-derived in-situ ceramic reinforced lightweight aluminum matrix composite. In: Journal of Alloys and Compounds, 880 .
Edachery, V and Shashank, R and Kailas, SV (2021) Influence of surface texture directionality and roughness on wettability, sliding angle, contact angle hysteresis, and lubricant entrapment capability. In: Tribology International, 158 .
Rajendran, A and Nadammal, N and Singh, K and Kailas, SV (2021) Effect of axial load-dependent deformation rate on the grain size distribution and mechanical properties of friction stir processed copper. In: Materials Performance and Characterization, 10 (2).
Edachery, V and John, A and Rajendran, A and Srinivasappa, V and Mathiyalagan, S and Kumar, S and Kailas, SV (2021) Enhancing tribological properties of Inconel X-750 superalloy through surface topography modification by shot blasting. In: Materials Performance and Characterization, 10 (2).
Malik, V and Kailas, SV (2021) Understanding the effect of tool geometrical aspects on intensity of mixing and void formation in friction stir process. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 (4). pp. 744-757.
Pariyar, A and Toth, LS and Kailas, SV and Peltier, L (2021) Imparting high-temperature grain stability to an Al-Mg alloy. In: Scripta Materialia, 190 . pp. 141-146.
Pariyar, A and Perugu, CS and Dash, K and Kailas, SV (2021) Microstructure and mechanical behavior of high toughness Al-based metal matrix composite reinforced with in-situ formed nickel aluminides. In: Materials Characterization, 171 .
Rokkala, U and Bontha, S and Ramesh, MR and Balla, VK and Srinivasan, A and Kailas, SV (2021) Tailoring surface characteristics of bioabsorbable Mg-Zn-Dy alloy using friction stir processing for improved wettability and degradation behavior. In: Journal of Materials Research and Technology, 12 . pp. 1530-1542.
Pariyar, A and Edachery, V and John, A and Kailas, SV (2021) A comparative tribological study of Inconel X750 under surface hardened and non-hardened conditions. In: Surface Topography: Metrology and Properties, 9 (3).
Suvin, PS and Gupta, P and Horng, J-H and Kailas, SV (2020) Evaluation of a comprehensive non-toxic, biodegradable and sustainable cutting fluid developed from coconut oil. In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology . (In Press)
J, AR and Kailas, SV (2020) Evolution of wear debris morphology during dry sliding of Ti�6Al�4V against SS316L under ambient and vacuum conditions. In: Wear, 456-57 .
Madhu, HC and Edachery, V and Lijesh, KP and Perugu, CS and Kailas, SV (2020) Fabrication of Wear-Resistant Ti3AlC2/Al3Ti Hybrid Aluminum Composites by Friction Stir Processing. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (8). pp. 4086-4099.
Abolusoro, OP and Akinlabi, ET and Kailas, SV (2020) Impact of tool profile on mechanical behavior and material flow in friction stir welding of dissimilar aluminum alloys Einfluss des Werkzeugprofils auf mechanisches Verhalten und Materialfluss beim Rührreibschwei�en unterschiedlicher Aluminiumlegierungen. In: Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 725-731.
Kar, A and Yadav, D and Suwas, S and Kailas, SV (2020) Role of plastic deformation mechanisms during the microstructural evolution and intermetallics formation in dissimilar friction stir weld. In: Materials Characterization, 164 .
Abolusoro, OP and Akinlabi, ET and Kailas, SV (2020) Tool rotational speed impact on temperature variations, mechanical properties and microstructure of friction stir welding of dissimilar high-strength aluminium alloys. In: Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (4).
Kar, A and Kailas, SV and Suwas, S (2020) Mechanism of variation in high-temperature grain stability of aluminum in dissimilar friction stir welds. In: Materials Performance and Characterization, 9 (2).
Kar, A and Kailas, SV and Suwas, S (2020) Formation sequence of intermetallics and kinetics of reaction layer growth during solid state reaction between titanium and aluminum. In: Materialia, 11 (100702).
Somarajan, SP and Horng, JH and Kailas, SV (2019) Development and testing of a modular lathe tribometer tool to evaluate the lubricity aspect of cutting fluids on freshly cut surfaces. In: Tribology Online, 14 (5). pp. 417-421.
Kar, A and Kailas, SV and Suwas, S (2019) Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer. In: Transactions of the Indian Institute of Metals .
Kumar, V and Wani, MF and Mannekote, JK and Kailas, SV (2019) Tribological Properties of Some Fatty Acids. In: 2nd International Conference on New Frontiers in Engineering, Science and Technology, NFEST 2019, 18 - 22 February 2019, Kurukshetra, Haryana.
Somarajan, SP and Kailas, SV (2018) Study and comparison of lubricity of green and commercial cutting fluid using tool-chip tribometer. In: Tribology Online, 13 (6). pp. 340-350.
Malik, V and Kailas, SV (2018) Plasticine modeling of material mixing in friction stir welding. In: Journal of Materials Processing Technology, 258 . pp. 80-88.
Azeez, ST and Akinlabi, ET and Kailas, SV and Brandi, SD (2018) Microstructural properties of a dissimilar friction stir welded thick aluminum aa6082-t6 and aa7075-t6 alloy. In: MATERIALS TODAY-PROCEEDINGS, 5 (9, 3). pp. 18297-18306.
Mannekote, JK and Kathyayini, N and Venkatesh, K and Kailas, SV (2017) Study on Effect of Aging and Aging Temperature on Frictional Properties of Coconut Oil Samples. In: Journal of Scientific and Industrial Research, 76 (6). pp. 376-380.
Kumar, PA and Raj, R and Kailas, SV (2015) Polymer Derived In-Situ Nano Metal Matrix Composites Obtained by Friction Stir Processing. In: 30th Technical Conference of the American-Society-for-Composites, SEP 28-30, 2015, East Lansing, MI, pp. 2368-2382.
Venukumar, S and Yalagi, SG and Muthukumaran, S and Kailas, SV (2014) Static shear strength and fatigue life of refill friction stir spot welded AA 6061-T6 sheets. In: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 19 (3). pp. 214-223.
Ghosh, M and Husain, Md M and Kumar, K and Kailas, SV (2013) Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (12). pp. 3890-3901.
Mahesh, C and Deb, A and Kailas, SV and Shankar, Uma C and Kutty, TRG and Mahule, KN (2013) A STUDY INTO THE BEHAVIOR OF AN ALUMINUM FOAM UNDER COMPRESSION. In: 11th Asia-Pacific Conference on Engineering Plasticity and its Applications, DEC 05-07, 2012 , Singapore, SINGAPORE, pp. 64-67.
Kumar, K and Kailas, SV (2010) Positional dependence of material flow in friction stir welding: analysis of joint line remnant and its relevance to dissimilar metal welding. In: Science and Technology of Welding & Joining, 15 (4). pp. 305-311.
