Design of a flexure for surface forces apparatus

Devaprakasam, D and Biswas, SK (2003) Design of a flexure for surface forces apparatus. In: Review of Scientific Instruments, 74 (3). pp. 1228-1233.

PDF Design_of_a_flexure.pdf Restricted to Registered users only Download (322kB) | Request a copy

Abstract

We report the design of a variation of a double cantilever flexure system used for the measurement of displacement and force in surface force apparatus (SFA). The new force sensor is called dual double cantilever. The simple cantilever flexure suffers rotation, sideways deflection, and thermal expansion at the free end when loaded normally and asymmetrically. In the double cantilever these errors are minimized to a second order. In the dual double cantilever flexure the stiffness is enhanced 16 times as that of a single cantilever flexure but the rotation, sideways deflection, and thermal expansion at the free end are brought to many orders below the instrument resolutions. The new design enables the measurement of deflection by optical and capacitive sensing methods. The stiffness and the strain of the aluminum alloy [AUG1(2024)] flexure were estimated [dimensions, length (l=50.5 mm), breadth (b=10.5 mm), and thickness (t=1.2 mm)] by finite element method and were also validated experimentally. The finite element method was also used to create a map for the selection of a flexure geometry relevant to the properties of material under investigation by a SFA or a nanoindenter.

Item Type:	Journal Article
Publication:	Review of Scientific Instruments
Publisher:	American Institute of Physics
Additional Information:	Copyright of this article belongs to American Institute of Physics.
Department/Centre:	Division of Mechanical Sciences > Mechanical Engineering
Date Deposited:	01 Jun 2006
Last Modified:	19 Sep 2010 04:28
URI:	http://eprints.iisc.ac.in/id/eprint/7237

Actions (login required)

View Item