Transitions to different kinds of turbulence in a channel with soft walls

Srinivas, S S and Kumaran, V (2017) Transitions to different kinds of turbulence in a channel with soft walls. In: JOURNAL OF FLUID MECHANICS, 822 . pp. 267-306.

PDF Jou_Flu_Mec_822_267_2017.pdf - Published Version Restricted to Registered users only Download (979kB) | Request a copy

Abstract

The flow in a rectangular channel with walls made of polyacrylamide gel is experimentally studied to examine the effect of soft walls on transition and turbulence. The bottom wall is fixed to a substrate and the top wall is unrestrained. As the Reynolds number increases, two different flow regimes are observed. The first is the `soft-wall turbulence' (Srinivas & Kumaran, J. Fluid Mech., vol. 780, 2015, pp. 649-686). There is a large increase in the magnitudes of the velocity fluctuations after transition and the fluid velocity fluctuations appear to be non-zero at the soft walls, although higher resolution measurements are required to establish the nature of the boundary dynamics. The fluid velocity fluctuations are symmetric about the centreline of the channel, and they show relatively little downstream variation. The wall displacement measurements indicate that there is no observable motion perpendicular to the surface to within the experimental resolution, but displacement fluctuations parallel to the surface are observed after transition. As the Reynolds number is further increased, there is a second `wall-flutter' transition, which involves visible downstream travelling waves in the top (unrestrained) wall alone. Wall displacement fluctuations of frequency less than approximately 500 rad s(-1) are observed both parallel and perpendicular to the wall. The mean velocity profiles and turbulence intensities are asymmetric, with much larger turbulence intensities near the top wall. The transitions are observed in sequence from a laminar flow at Reynolds number less than 1000 for a channel of height 0.6 mm and from a turbulent flow at a Reynolds number greater than 1000 for a channel of height 1.8 mm.

Item Type:	Journal Article
Publication:	JOURNAL OF FLUID MECHANICS
Additional Information:	Copyright for this article belong to CAMBRIDGE UNIV PRESS, 32 AVENUE OF THE AMERICAS, NEW YORK, NY 10013-2473 USA
Department/Centre:	Division of Mechanical Sciences > Chemical Engineering
Date Deposited:	07 Jul 2017 06:11
Last Modified:	07 Jul 2017 06:11
URI:	http://eprints.iisc.ac.in/id/eprint/57314

Actions (login required)

View Item