Wallner lines, crack velocity and mechanisms of crack nucleation and growth in a brittle bulk metallic glass

Narayan, RL and Tandaiya, Parag and Narasimhan, R and Ramamurty, U (2014) Wallner lines, crack velocity and mechanisms of crack nucleation and growth in a brittle bulk metallic glass. In: ACTA MATERIALIA, 80 . pp. 407-420.

PDF acta_mat_80_407_2014.pdf - Published Version Restricted to Registered users only Download (6MB) | Request a copy

Abstract

Mode I fracture experiments were conducted on brittle bulk metallic glass (BMG) samples and the fracture surface features were analyzed in detail to understand the underlying physical processes. Wollner lines, which result from the interaction between the propagating crack front and shear waves emanating from a secondary source, were observed on the fracture surface and geometric analysis of them indicates that the maximum crack velocity is similar to 800 m s(-1), which corresponds to similar to 0.32 times the shear wave speed. Fractography reveals that the sharp crack nucleation at the notch tip occurs at the mid-section of the specimens with the observation of flat and half-penny-shaped cracks. On this basis, we conclude that the crack initiation in brittle BMGs is stress-controlled and occurs through hydrostatic stress-assisted cavity nucleation ahead of the notch tip. High magnification scanning electron and atomic force microscopies of the dynamic crack growth regions reveal highly organized, nanoscale periodic patterns with a spacing of similar to 79 nm. Juxtaposition of the crack velocity with this spacing suggests that the crack takes similar to 10(-10) s for peak-to-peak propagation. This, and the estimated adiabatic temperature rise ahead of the propagating crack tip that suggests local softening, is utilized to critically discuss possible causes for the nanocorrugation formation. Taylor's fluid meniscus instability is unequivocally ruled out. Then, two other possible mechanisms, viz. (a) crack tip blunting and resharpening through nanovoid nucleation and growth ahead of the crack tip and eventual coalescence, and (b) dynamic oscillation of the crack in a thin slab of softened zone ahead of the crack-tip, are critically discussed. (C) 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Item Type:	Journal Article
Publication:	ACTA MATERIALIA
Additional Information:	Copyrights for this articles belongs to the PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND
Department/Centre:	Division of Mechanical Sciences > Mechanical Engineering Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited:	14 Dec 2014 09:51
Last Modified:	14 Dec 2014 09:51
URI:	http://eprints.iisc.ac.in/id/eprint/50424

Actions (login required)

View Item