ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

STM verification of the reduction of the Young's modulus of CdS nanoparticles at smaller sizes

Hazarika, A and Peretz, E and Dikovsky, V and Santra, PK and Shneck, RZ and Sarma, DD and Manassen, Y (2014) STM verification of the reduction of the Young's modulus of CdS nanoparticles at smaller sizes. In: SURFACE SCIENCE, 630 . pp. 89-95.

[img] PDF
sur_sci_630_89_2014.pdf - Published Version
Restricted to Registered users only

Download (662kB) | Request a copy
Official URL: http://dx.doi.org/ 10.1016/j.susc.2014.07.006

Abstract

We demonstrate the first STM evaluation of the Young's modulus (E) of nanoparticles (NPs) of different sizes. The sample deformation induced by tip-sample interaction has been determined using current-distance (I-Z) spectroscopy. As a result of tip-sample interaction, and the induced surface deformations, the I-z curves deviates from pure exponential dependence. Normally, in order to analyze the deformation quantitatively, the tip radius must be known. We show, that this necessity is eliminated by measuring the deformation on a substrate with a known Young's modulus (Au(111)) and estimating the tip radius, and afterwards, using the same tip (with a known radius) to measure the (unknown) Young's modulus of another sample (nanoparticles of CdS). The Young's modulus values found for 3 NP's samples of average diameters of 3.7, 6 and 7.5 nm, were E similar to 73%, 78% and 88% of the bulk value, respectively. These results are in a good agreement with the theoretically predicted reduction of the Young's modulus due to the changes in hydrostatic stresses which resulted from surface tension in nanoparticles with different sizes. Our calculation using third order elastic constants gives a reduction of E which scales linearly with 1/r (r is the NP's radius). This demonstrates the applicability of scanning tunneling spectroscopy for local mechanical characterization of nanoobjects. The method does not include a direct measurement of the tip-sample force but is rather based on the study of the relative elastic response. (C) 2014 Elsevier B.V. All rights reserved.

Item Type: Journal Article
Publication: SURFACE SCIENCE
Additional Information: Copyrights for this articles belongs to the ELSEVIER SCIENCE BV, PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS
Department/Centre: Division of Chemical Sciences > Solid State & Structural Chemistry Unit
Date Deposited: 14 Dec 2014 07:31
Last Modified: 14 Dec 2014 07:31
URI: http://eprints.iisc.ac.in/id/eprint/50418

Actions (login required)

View Item View Item