Guided wave based detection of damage in honeycomb core sandwich structures

Chakraborty, N and Rathod, VT and Mahapatra, Roy D and Gopalakrishnan, S (2012) Guided wave based detection of damage in honeycomb core sandwich structures. In: NDT & E INTERNATIONAL, 49 . pp. 27-33.

PDF ndt_E_int_49_27-33_2012.pdf - Published Version Restricted to Registered users only Download (881kB) | Request a copy

Abstract

We report on the Lamb wave type guided wave propagation in honeycomb core sandwich structures. An experimental study supported by theoretical evaluation of the guided wave characteristics is presented that proves the potential of Lamb wave type guided wave for detection of damage in sandwich structures. A sandwich panel is fabricated with planar dimension of 600 mm x 600 mm, having a core thickness of 7 mm, cell size of 5 mm and 0.1 mm thick aluminum face sheets. Thin piezoelectric patch actuators and sensors are used to excite and sense a frequency band limited guided wave with a central frequency. A linear phased array of piezoelectric patch actuators is used to achieve higher signal strength and directivity. Group velocity dispersion curves and corresponding frequency response of sensed signal are obtained experimentally. Linearity between the excitation signal amplitude and the corresponding sensed signal amplitude is found for certain range of parameters. The nature of damping present in the sandwich panel is monitored by measuring the sensor signal amplitude at various different distances measured from the center of the linear phased array. Indentation and low velocity impact induced damages of increasing diameter covering several honeycomb cells are created. Crushing of honeycomb core with rupture of face sheet is observed while introducing the damage. The damages are then detected experimentally by pitch-catch interrogation with guided waves and wavelet transform of the sensed signal. Signal amplitudes are analyzed for various different sizes of damages to differentiate the damage size/severity. Monotonic changes in the sensor signal amplitude due to increase in the damage size has been established successfully. With this approach it is possible to locate and monitor the damages with the help of phased array and by tracking the wave packets scattered from the damages. (C) 2012 Elsevier Ltd. All rights reserved.

Item Type:	Journal Article
Publication:	NDT & E INTERNATIONAL
Publisher:	ELSEVIER SCI LTD
Additional Information:	Copy right for this article belongs to Elsevier Sci LTD
Keywords:	Guided wave;Lamb wave;Dispersion;Honeycomb;Sandwich;Damping; Damage;Phased array
Department/Centre:	Division of Mechanical Sciences > Aerospace Engineering(Formerly Aeronautical Engineering)
Date Deposited:	17 Jul 2012 11:27
Last Modified:	30 Apr 2013 07:22
URI:	http://eprints.iisc.ac.in/id/eprint/44822

Actions (login required)

View Item