Measurement of Gibbs energy of formation of Ca2PbO4 using a solid-state cell with three electrodes

Jacob, KT and Jayadevan, KP (1997) Measurement of Gibbs energy of formation of Ca2PbO4 using a solid-state cell with three electrodes. In: Journal of Materials Chemistry, 7 (12). pp. 2407-2413.

PDF Measurement_of_Gibbs_energy_of_formation.pdf - Published Version Restricted to Registered users only Download (171kB) | Request a copy

Abstract

Phase relations in the system Ca-Pb-O at 1100 K have been determined by equilibrating 18 compositions in the ternary and identifying the phases present in quenched samples by X-ray diffraction and energy dispersive X-ray analysis (EDX). Only one ternary compound Ca2PbO4 was found to be present. The compound coexists with CaO and PbO. The intermetallic compounds Ca2Pb, Ca5Pb3 and CaPb and liquid alloys are in equilibrium with CaO. The standard Gibbs energies of formation of Ca2PbO4 (880 - 1100 K) and Pb3O4 (770 - 910 K) were determined using solid-state cells based on yttria-stabilized zirconia as the solid electrolyte. Pure oxygen gas at 0.1 MPa was used as the reference electrode. For measurements on Ca2PbO4, a novel cell design with three electrodes in series, separated by solid electrolyte membranes, was used to avoid polarization of the electrode containing three solid phases. Two three-phase electrodes were used. The first absorbs the electrochemical flux of oxygen from the reference electrode to the measuring electrode. The other three-phase electrode, which is unaffected by the oxygen flux through the solid electrolyte, is used for electromotive force (EMF) measurement. The results from EMF studies were cross-checked using thermogravimetry (TG) under controlled oxygen partial pressures. The stability of Pb3O4 was investigated using a conventional solid-state cell with RuO2 electrodes. The results can be summarized by the following equations: 2CaO + PbO +1/2O(2) --> Ca2PbO4 Delta(r)G degrees/J mol(-1) = (- 128340 + 93.21 T/K) +/- 200 3PbO + 1/2O(2) --> Pb3O4 Delta(r)G degrees/J mol(-1) = (- 70060 + 77.5 T/K) +/- 150

Item Type:	Journal Article
Publication:	Journal of Materials Chemistry
Publisher:	Royal Society of Chemistry
Additional Information:	Copyright of this article belongs to Royal Society of Chemistry.
Department/Centre:	Division of Chemical Sciences > Materials Research Centre Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited:	29 Aug 2011 09:29
Last Modified:	29 Aug 2011 09:29
URI:	http://eprints.iisc.ac.in/id/eprint/38296

Actions (login required)

View Item