Ray, AK and Roy, N and Dash, B and Das, DK and Ranganath, VR and Goswami, B and Singh, MP and Tiwari, YN and Roy, PK and Das, HK and Sanyal, D and Dwarakadasa, ES (2006) High temperature mechanical properties of thermal barrier coated superalloy applied to combustor liner of aero engines. In: High temperature materials and processes, 25 (3). pp. 109-119.
Full text not available from this repository. (Request a copy)Abstract
High temperature load controlled fatigue, hot tensile and accelerated creep properties of thermal barrier coated (TBC) Superni C263 alloy used as a candidate material in combustor liner of aero engines are highlighted in this paper. Acoustic emission technique has been utilised to characterise the ductile-brittle transition teperature the bond coat. Results revealed that the DBTT (ductile to brittle transition temperature) of this bond coat is around 923 K, which is in close proximity to the value reported for CoCrAlY type of bond coat. Finite element technique, used for analysing the equivalent stresses in the bond coat well within the elastic limit, revealed the highest order of equivalent stress at 1073 K as the bond coat is ductile above 923 K. The endurance limit in fatigue and the life of TBC coated composite under accelerated creep conditions are substantially higher than those of the substrate material. Fractographic features at high stresses under fatigue showed intergranular cleavage whereas those at low stresses were transgranular and ductile in nature. Delamination of the bond coat and spallation of the TBC at high stresses during fatigue was evident. Unlike in the case of fatigue, the mode of fracture in the substrate at very high stresses was transgranular whereas that at low stresses was intergranular in creep.
| Item Type: | Journal Article |
|---|---|
| Publication: | High temperature materials and processes |
| Publisher: | Freund Publishing House Ltd |
| Additional Information: | copyright of this article belongs to Freund Publishing House Ltd. |
| Keywords: | thermal barrier coating; substrate; fatigue; creep; tensile; finite element; fractography; trans-granular; intergranular; spallation. |
| Department/Centre: | Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy) |
| Date Deposited: | 04 Aug 2010 08:57 |
| Last Modified: | 11 Nov 2010 09:26 |
| URI: | http://eprints.iisc.ac.in/id/eprint/30801 |
Actions (login required)
 |
View Item |
