Low oxygen potential boundary for the stability of $YBA_2Cu_3O_{7−\delta}$

Jacob, KT and Matthews, T and Hajra, JP (1990) Low oxygen potential boundary for the stability of $YBA_2Cu_3O_{7−\delta}$. In: Materials Science and Engineering B, 7 (1-2). pp. 25-29.

PDF Low_Oxygen_Potential_Boundary_for_the_Stability_of_YBa2Ctl307__6.pdf Restricted to Registered users only Download (432kB) | Request a copy

Abstract

On lowering the oxygen potential, the tetragonal phase of $Yba_2Cu_3O_{7−\delta}$ was found to decompose into a mixture of $Y_2BaCuO_5, BaCuO_2$ and $BaCu_2O_2 $ in the temperature range 773–1173 K. The 123 compound was contained in a closed crucible of yttria-stabilized zirconia in the temperature range 773–1073 K. Oxygen was removed in small increments by coulometric titration through the solid electrolyte crucible at constant temperature. The oxygen potential was calculated from the open circuit e.m.f. of the solid state cell after successive titrations. Pure oxygen at a pressure of $1.01 \times 10^5 $ Pa was used as the reference electrode. The decomposition of the 123 compound manifested as a plateau in oxygen potential. The decomposition products were identified by x-ray diffraction. At temperatures above 1073 K there was some evidence of reaction between the 123 compound, solid electrolyte crucible and platinum. For measurements above 1073 K, the 123 compound was contained in a magnesia crucible placed in a closed outer silica tube. The oxygen potential in the gas phase above the 123 compound was controlled and measured by a solid state cell based on yttria-stabilized zirconia which served both as a pump and sensor. The lower oxygen potential limit for the stability of the 123 compound is given by $\bigtriangleup\mu_{o2} =- 181 450 + 105.37T (\pm400) J mol^1$ The oxygen non-tachometric parameter$\delta$ for the 123 compound has a value of $0.98 (\pm 0.01)$ at dissociation.

Item Type:	Journal Article
Publication:	Materials Science and Engineering B
Publisher:	Elsevier Sequoia
Additional Information:	Copyright of this article belongs to Elsevier Sequoia.
Keywords:	Low oxygen;potential boundary
Department/Centre:	Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited:	14 Dec 2007
Last Modified:	19 Sep 2010 04:41
URI:	http://eprints.iisc.ac.in/id/eprint/12526

Actions (login required)

View Item