ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Corrosion behaviour of silicon carbide particle reinforced 6061/AI alloy composites

Bhat, MSN and Surappa, MK and Nayak, Sudhaker HV (1991) Corrosion behaviour of silicon carbide particle reinforced 6061/AI alloy composites. In: Journal of Materials Science, 26 (18). pp. 4991-96.

[img] PDF
Corrosion_behaviour.pdf - Published Version
Restricted to Registered users only

Download (2MB) | Request a copy
Official URL: http://www.springerlink.com/content/jq656024171035...

Abstract

The corrosion behaviour of 6061 AI alloy-$SiC_p$ composites (in as cast and extruded form) have been studied in sea water and acid media. The effects of temperature of both the media and concentration of the acid medium were also investigated. The corrosion behaviour was evaluated using electrochemical technique and corroded specimens were examined using scanning electron microscopy. The studies revealed that corrosion damage of composites exposed to sea water medium was mainly localized in contrast to uniform corrosion observed for base alloy. Further, composites were found to corrode faster than the base alloy even though the attack was mainly confined to the interface, resulting in crevices or pits. This could be attributed to the presence of thin layer of reaction product present at the interface acting as an effective cathode which when continuous would increase the cathode to anode ratio enabling higher localized corrosion. However, the extent of corrosion damage in extruded composites was less possibly due to absence of defects like gas pores in the composites and homogeneity in the distribution of particles. Increase in temperature invariably increased the attack for all the materials studied. This is explained due to the metal dissolution (anodic process) which is governed by the kinetics at that temperature.

Item Type: Journal Article
Publication: Journal of Materials Science
Publisher: Springer
Additional Information: Copyright of this article belongs to Springer.
Department/Centre: Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited: 26 Jun 2007
Last Modified: 16 Jan 2012 09:48
URI: http://eprints.iisc.ac.in/id/eprint/11239

Actions (login required)

View Item View Item