ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help


Agarwal, Harshit and Amaranath, Akshay and Jamthe, Yogesh and Gururaja, Suhasini (2016) AN INVESTIGATION OF CUTTING MECHANISMS AND STRAIN FIELDS DURING ORTHOGONAL CUTTING IN CFRPs. In: MACHINING SCIENCE AND TECHNOLOGY, 19 (3). pp. 416-439.

Full text not available from this repository. (Request a copy)
Official URL: http://dx.doi.org/10.1080/10910344.2015.1051539


Fiber-reinforced plastics (FRPs) are typically difficult to machine due to their highly heterogeneous and anisotropic nature and the presence of two phases (fiber and matrix) with vastly different strengths and stiffnesses. Typical machining damage mechanisms in FRPs include series of brittle fractures (especially for thermosets) due to shearing and cracking of matrix material, fiber pull-outs, burring, fuzzing, fiber-matrix debonding, etc. With the aim of understanding the influence of the pronounced heterogeneity and anisotropy observed in FRPs, ``Idealized'' Carbon FRP (I-CFRP) plates were prepared using epoxy resin with embedded equispaced tows of carbon fibers. Orthogonal cutting of these I-CFRPs was carried out, and the chip formation characteristics, cutting force signals and strain distributions obtained during machining were analyzed using the Digital Image Correlation (DIC) technique. In addition, the same procedure was repeated on Uni-Directional CFRPs (UD-CFRPs). Chip formation mechanisms in FRPs were found to depend on the depth of cut and fiber orientation with pure epoxy showing a pronounced ``size effect.'' Experimental results indicate that in-situ full field strain measurements from DIC coupled with force measurements using dynamometry provide an adequate measure of anisotropy and heterogeneity during orthogonal cutting.

Item Type: Journal Article
Additional Information: Copy right for this article belongs to the Copy right for this article belongs to the
Keywords: chip formation; cutting forces; digital image correlation (DIC); fiber-reinforced plastics (FRPs); orthogonal machining
Department/Centre: Division of Mechanical Sciences > Aerospace Engineering(Formerly Aeronautical Engineering)
Depositing User: Id for Latest eprints
Date Deposited: 04 Mar 2016 06:02
Last Modified: 04 Mar 2016 06:02
URI: http://eprints.iisc.ac.in/id/eprint/53382

Actions (login required)

View Item View Item