Kumar, S and Pandey, PC (2010) Behaviour of Bi-adhesive Joints. In: Journal of Adhesion Science and Technology, 24 (7). pp. 1251-1281.
Full text not available from this repository. (Request a copy)Abstract
The use of relatively low modulus adhesive at the ends of overlap in a bi-adhesive bondline of a bonded joint can reduce the stress concentration significantly and, therefore, potentially lead to higher strength of the joint. This study presents the two-dimensional and three-dimensional nonlinear (geometric and material) finite element analyses of adhesively bonded single lap joints having modulus-graded bondline under monotonic loading conditions. The adhesives were modelled as an elasto-plastic multi-linear material, while the substrates were regarded as both linear elastic and bi-linear elasto-plastic material. The computational simulations have been performed to investigate the bondline behaviour by studying the stress and strain distributions both at the mid-plane as well as at the interface of the bondline. It has been observed that the static strength is higher for joints with bi-adhesive bondlines compared to those with single adhesives in bondline. Higher joint strength has also been observed for optimum bi-adhesive bondline ratio through parametric studies. Effects of load level, and bondline thickness on stress distribution in the bi-adhesive bondline have also been studied. 3D analysis results reveal the existence of complex multi-axial stress/strain state at the ends of the overlap in the bondline which cannot be observed in 2D plane strain analysis. About 1/3rd of the width of the joint from the free edge in the width direction has 3D stress state, especially in the compliant adhesive of the bondline. Magnitudes of longitudinal and lateral stress/strain components are comparable to peel stress/strain components. It has also been analytically shown that the in-plane global stiffness of the joint remains unaffected by modulus gradation of the bondline adhesive. (C) Koninklijke Brill NV, Leiden, 2010.
| Item Type: | Journal Article |
|---|---|
| Publication: | Journal of Adhesion Science and Technology |
| Publisher: | Brill |
| Additional Information: | Copyright of this article belongs to Brill. |
| Keywords: | Adhesively-bonded joints;three-dimensional finite elements; geometric nonlinearity;material nonlinearity; stress concentrationmonotonic performance |
| Department/Centre: | Division of Mechanical Sciences > Civil Engineering |
| Date Deposited: | 22 Jul 2010 04:56 |
| Last Modified: | 22 Jul 2010 04:56 |
| URI: | http://eprints.iisc.ac.in/id/eprint/30388 |
Actions (login required)
 |
View Item |
