Transmission loss analysis of rectangular expansion chamber with arbitrary location of inlet/outlet by means of Green's functions

Venkatesham, B and Tiwari, Mayank and Munjal, ML (2009) Transmission loss analysis of rectangular expansion chamber with arbitrary location of inlet/outlet by means of Green's functions. In: Journal of Sound and Vibration, 323 (3-5). pp. 1032-1044.

PDF 3.pdf - Published Version Restricted to Registered users only Download (428kB) | Request a copy

Abstract

Transmission loss of a rectangular expansion chamber, the inlet and outlet of which are situated at arbitrary locations of the chamber, i.e., the side wall or the face of the chamber, are analyzed here based on the Green's function of a rectangular cavity with homogeneous boundary conditions. The rectangular chamber Green's function is expressed in terms of a finite number of rigid rectangular cavity mode shapes. The inlet and outlet ports are modeled as uniform velocity pistons. If the size of the piston is small compared to wavelength, then the plane wave excitation is a valid assumption. The velocity potential inside the chamber is expressed by superimposing the velocity potentials of two different configurations. The first configuration is a piston source at the inlet port and a rigid termination at the outlet, and the second one is a piston at the outlet with a rigid termination at the inlet. Pressure inside the chamber is derived from velocity potentials using linear momentum equation. The average pressure acting on the pistons at the inlet and outlet locations is estimated by integrating the acoustic pressure over the piston area in the two constituent configurations. The transfer matrix is derived from the average pressure values and thence the transmission loss is calculated. The results are verified against those in the literature where use has been made of modal expansions and also numerical models (FEM fluid). The transfer matrix formulation for yielding wall rectangular chambers has been derived incorporating the structural–acoustic coupling. Parametric studies are conducted for different inlet and outlet configurations, and the various phenomena occurring in the TL curves that cannot be explained by the classical plane wave theory, are discussed.

Item Type:	Journal Article
Publication:	Journal of Sound and Vibration
Publisher:	Elsevier Science
Additional Information:	Copyright of this article belongs to Elsevier Science.
Department/Centre:	Division of Mechanical Sciences > Mechanical Engineering
Date Deposited:	11 Dec 2009 12:29
Last Modified:	19 Sep 2010 05:35
URI:	http://eprints.iisc.ac.in/id/eprint/20992

Actions (login required)

View Item